EN
Deutsch
Espanol
Finland
Polskie
Polymel MP-80
Polymel MP-80
Our Filler Masterbatch Polymel MP-80 is compounded of high quality filler, polymer PP and other additive agents. The purpose of these additives is to fill up the polyolefin and improve their properties during processing. The main aim of CaCo3 concentrate – reduction of products‘ price. Pellets of CaCO3 concentrates are round, this allows to mix evenly with polypropylene (polyethylene) and achieve a seamless and efficient distribution into the final product.
Our calcium carbonate is made of high quality and micro sized material (2~10 micron) with PP based, it has good dispersion and environmental protection, which can improve
- surface antifriction,
- heat stability,
- toughness,
- hardness,
- rigidity
- dimensional stability,
- weldability
- printability
- reduction of white masterbatch requirement
- improved anti-blocking properties
- and increase specific gravity of plastic products.
We recommend to use our products for the next plastic process:
- blow film,
- blow molding,
- injection molding,
- wire drawing,
- bag molding,
- slip casting,
- extrusion molding
Using our Filler Polymel MP-80 help you to reduce the production cost and improve the character of final products.
You can use our filler for the products:
- Films
- Big bag
- Plastic cups
- Woven bag
- Strapping tape
- Geotextiles
- Sheet
- Pipe
- Tube
- Plastic bottles
- Packaging films
- Containers
And another products on the base PP
Filler MasterBatch is produced in a highly respective environment, with high quality process and selective raw materials. Focus on satisfying customer’s plastic needs, our expertise shares a global database of successful matches, which we combine with unequaled polymer knowledge to provide you with accurate master batches and precolored resins and compounds.
Other masterbatches with different type(s)/level(s) of fillers can be produced upon request
We offer a CaCO3 LLDPE and PP basis.
Packing - 25 kg bags
Testing of Filler masterbatch
| Item |
Test method |
Spec. |
Unit |
Result |
|---|---|---|---|---|
|
Melt index (MFI) |
ASTM D 1238 |
9 ± 2.0 |
g/10min |
10.2 |
|
Density |
ASTM D 792 |
1.8+0.1 |
g/cm3 |
1.9 |
|
Moisture |
ASTM D 570 |
max, 0.20 |
WT % |
0,2 |
|
PP |
|
20±1 |
WT % |
18 |
|
CaCO3 |
ASTM D 4218 |
80±1 |
WT % |
80 |
|
Particle size |
|
3 mm ± 0.1 |
mm |
3 mm |
|
CaCO3 powder size |
2 mic ±0.5 |
micron |
2 |
